FusionRetail™ 6 FAQ

Printing Logo in Bixolon Srp350 40 column thermal POS printer:

By using the following steps you can easily print your company’s Logo in Samsung Bixolon SRP 350P 40 column thermal receipt printer. Please use the following steps…

Step1: Installing the NV Image Tool software.

Please use the following link to download the NV Image tool for Samsung Bixolon SRP 350P printer.

• Click to download Bixolon NV Image Tool

Step2: Setting the NV Image Tool software.

Step3: Adding the logo in printer memory.

Sub-Step-1(Setting the printer in proper port)

1. Open the NV Image Tool software.
2. Click on the Port Setting button.
3. Select the Printer model.
4. Select the Interface.
5. Set the Port.
6. Click the OK button.

Sub-Step-2 (Adding Logo image in the printer)

1. Click on the Open File button.
2. Locate the Logo file (The Logo file must be in Bitmap form).
3. Click on Open button.
4. Click on the Download button.
5. Click on Download Start button (It downloads the Logo image into the printer).
6. The Software shows a Download complete message after completing the download.
7. Click on the Cancel button.

Sub-Step-3 (Printing the Logo from the printer)

1. Click on the Print button.
2. The Logo gets printed.
3. Click on the Exit button.

Setting in RanceLab® FusionRetail™ 6

 Step1: Printer Setup

• Go to Main Menu > Settings > Application Settings > Station Setup (T>A>S) and set a printer in DOS
• You can use the following lick to learn more about DOS mode receipt printer setup.
  • http://www.rancelab.com/faq/solution_id_1311.html

Step2: Setting the Logo printing command

1. Go to Main Menu > Sales Management > Transaction > Sales Invoice (POS) (S>T>S)
2. Alt + R (or you can also use ‘–R Opt Prn POS’ button)
3. Set “Print Header from = Option”
4. Go to ‘Header (Bold)’ field
5. Type ‘<NP>28,112,1,0,48</NP>’
6. Save

Now make a bill and check the print out.

For more information regarding NV Image Tool please visit the link:

http://www.sensiblecinema.com/bow/Download/NV%20Manual%20english_Rev_2_05.pdf

Printing Logo in Citizen 40 column thermal POS printer:

Answer: By using the following steps you can easily print your company’s Logo in CITIZEN 40 column thermal receipt printer. Please use the following steps…

Step1: Download the graphics logo driver

Please use the following link to download the graphics logo driver.

• Click to download Citizen Graphic Loader 

Step1: Install the Logo Graphics driver

Step2: Adding the logo in printer memory

A: Setting the driver in a right port

• Open the logo graphics driver software
• Click on the “Set” menu
• Select  “Interface”  option
• Adjust the proper printer port and other details here.
• Click on the “Set” button.

B: adding the logo image 

• Click on the “File” menu
• Select  “Open”  option
• Browse and select the Logo image file
• It will show the image in the Image driver software
• Adjust the position of the image
• Again click on the “File” menu
• Select “Save As” option
• Enter a proper name
• Press “Ok” button

C: Getting a print of the Logo image 

• Select the logo and click on the add button it will add the image in the print list3
• To check a test print click on the “File” menu
• Select “Send Data” option,
• It will send the logo to printer memory and then it will print the image through the printer.

Step3: Setting in RanceLab® FusionRetail™ 6 software

A: Printer Setup

• Go to Main Menu > Settings > Application Settings > Station Setup (T>A>S) and set a printer in DOS
• You can use the following lick to learn more about DOS mode receipt printer setup.
• http://www.rancelab.com/faq/solution_id_1311.html

B: Setting the Logo printing command 

• Go to Main Menu > Sales Management > Transaction > Sales Invoice (POS) (S>T>S)
• Alt + R (or you can also use ‘–R Opt Prn POS’ button)
• Set “Print Header from = Option”
• Go to ‘Header (Bold)’ field
• Type ‘<NP>28,112,1,0,48</NP>’
• Save
• Now make a bill and check the print out.

For more details please visit:

• http://bixolon.com/_eng/bixolon_inc/program/down_download.asp?file=NV%20Image%20Tool%20V3.1.8a(Eng).zip
• http://www.rancelab.com/help/fr6_station.htm
• http://www.rancelab.com/faq/solution_id_1311.html
• http://www.rancelab.com/help/fr6_sale_invoice_pos.htm
• http://www.sensiblecinema.com/bow/Download/NV%20Manual%20english_Rev_2_05.pdf
• http://citizen-systems.com/support/downloads/utilitySoftwares/SetupGRL.exe
• http://www.rancelab.com/help/fr6_station.htm
• http://www.rancelab.com/faq/solution_id_1311.html